Dish Washers

Model: DCR37/6-AC-RC


  • 600×500 mm + Watersoftener continuously + condenser-recuperator of the steam
  • Voltage  – 400-230/3N 50Hz
  • 9.5 kw

SKU: DCR37/6-AC-RC Categories: ,



  • Realisation “double walled”. with thermic insulation.
  • Integration of the “Green System H.R.S.” Condenser vapor-recovery unit, big energy savings
  • Watersoftener continuously, incorporated.
  • Charging height diam. 465 mm.
  • Vertical wash pump (double flux), auto-drain and auto-wash (1,3Kw).
  • Standard rinse pump (atmospheric boiler).
  • Control panel at the top of the hood, digital display.
  • Basket 600×500 mm, capacity 22 plates, dishes 600×400 (see accessories), beer baskets 600×400 to 135 Lt, always the possibility of using 500×500 mm baskets. 3 cycles: 60 ‘- 110’ – 150 ” or continuous.
  • Device opening and closing cover on connecting rods. Function automatic water discharge tank, integrated in the control panel (no need to remove the plug manually).
  • Rotating wash and rinse arms.
  • Self cleaning sprinklers.
  • Adjustable stainless steel feet (160-220 mm).
  • Front control panel.
  • Automatic filling of the tank.
  • Check valve.
  • Hot water rinse, stainless steel boiler (12 Lit., 8 kW).
  • Micro switch, when the door opens.
  • Safety thermostat.
  • Manufactured in stainless steel AISI 304.
  • Standard : 1 basket for plates, 1 general basket, 1 goblet, connection tube to main water supply and discharge tube.


The “break tank” is an AB type “anti-pollution” device (UK standards) 1) It prevents the tank water (with detergents) to flow back into the distribution system 2) Its pump guarantees a constant pressure during the whole rinsing, the drying and hygiene are guaranteed by a T° of 85°C… until the last drop of water!

ADVANTAGE – Continuous Water Softener :

  • The continuous softener keeps water softened continuously, regardless of the number of washings, for a flawless result, with the advantage that the dishwasher should not be halted for the regeneration of resin. During the wash cycle micro-interruptions used to regenerate the resins, while continuing to wash.


  • Fully “pressed” tank, double wall (2,5 kW).
  • Double wall with thermal insulation.
  • “Integrated” tank’s filter in stainless steel.
  • “Peristaltic” dispenser of rinse product supplied as standard.
  • On request: “peristaltic” dosing kit of liquid detergent and drain pump kit.
  • “Patented” pump filter allowing to conserve the washing water longer and at good temperature.
  • Vertical washing pump, self draining and self cleaning.
  • CSD digital control panel (soft touch).
  • EED energy saving.
  • DRD accelerated preheating phase.
  • DID automatic diagnostic in case of problems.
  • ADD display of boiler and tank temperature (HACCP conform)
  • RGD Constant rinsing T° of 85°C, stable pressure during all the rinsing cycle.
  • BTD “Break Tank” anti-pollution device, AB type.

Warmth and steam recuperation system consisting of: a battery with double flow warmth-exchanger, heats up by crossing the cold water with the steam coming from the washing chamber.

          • Low running costs: the water T° rises up to 25°C, the result is a 38-% saving of electric energy.
          • Healthier work environment: by eliminating humidity emission in the environment, no more steam saturated of humidity up to 60°C.
          • Easy installations: no need to install an additional hood to eliminate the steam, no extra sanitary or electrical connections needed! NB No compatible con Osmose

Additional information

Weight 160 kg
Dimensions 788 × 835 × 1565 cm